{"title":"Benning","description":"\u003ch2 data-section-id=\"wm5zys\" data-start=\"0\" data-end=\"87\"\u003eBenning – Professional Measuring Instruments and Test Equipment for the Electrical and Electronics Industry\u003c\/h2\u003e\n\u003cp data-start=\"89\" data-end=\"557\"\u003eAccurate measurements are the foundation for safe installation, efficient troubleshooting, and reliable quality control. Benning is a renowned manufacturer of professional measuring instruments and test equipment used by technicians, installers, service departments, and manufacturing companies worldwide. At HIN A\/S, we offer a selection of Benning products developed for demanding professional environments where accuracy, operational reliability, and user-friendliness are crucial.\u003c\/p\u003e","products":[{"product_id":"benning-cflex-2-0-1a-3ka-med-digitalt-display-true-rms","title":"Flexible AC current transformer BENNING CFlex 2","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis description covers the BENNING CFlex 2 (item no. 044069), a flexible AC current transformer with a built-in 4-digit illuminated LC display. The device uses the TRUE RMS measurement method and is designed for direct measurements in low-voltage installations within the specified measurement category.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eBuilt-in 4-digit illuminated LC display\u003c\/li\u003e\n\n  \u003cli\u003eTrue RMS measurement method\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range: 0.1 A to 3000 A\u003c\/li\u003e\n\n  \u003cli\u003eThree measurement ranges: 30 A, 300 A, and 3000 A\u003c\/li\u003e\n\n  \u003cli\u003eMeasuring loop length: 46 cm\u003c\/li\u003e\n\n  \u003cli\u003eLoop diameter: 16 cm\u003c\/li\u003e\n\n  \u003cli\u003eLoop conductor diameter: 8.5 mm\u003c\/li\u003e\n\n  \u003cli\u003eConnection cable for the measuring loop: approx. 1.8 m\u003c\/li\u003e\n\n  \u003cli\u003eFunctions: HOLD, MIN\/MAX memory, battery status indicator, Auto-Power-Off (can be deactivated)\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: 3 × 1.5 V micro (AAA\/LR03) batteries included\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement category: CAT IV 600 V\u003c\/li\u003e\n\n  \u003cli\u003eComes with protective case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eThe BENNING CFlex 2 is suitable for measurements directly at the source in low-voltage installations, as stated in the manufacturer's product text. The CAT IV 600 V function indicates that the device can be used for measurements at the power source itself in low-voltage systems, within the specified measurement ranges and limits.\u003c\/p\u003e\n\n\u003ch3\u003eSources\u003c\/h3\u003e\n\u003cp\u003eInformation in this product text originates from the manufacturer's product information for BENNING CFlex 2 (item no. 044069).\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eManufacturer: BENNING\u003c\/li\u003e\n\n  \u003cli\u003eProduct name: BENNING CFlex 2\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer's item number: 044069\u003c\/li\u003e\n\n  \u003cli\u003eType: Flexible AC current transformer\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: 4-digit illuminated LC display\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement method: TRUE RMS\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range: 0.1 A – 3000 A\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement ranges: 30 A \/ 300 A \/ 3000 A\u003c\/li\u003e\n\n  \u003cli\u003eMeasuring loop length: 46 cm\u003c\/li\u003e\n\n  \u003cli\u003eLoop diameter: 16 cm\u003c\/li\u003e\n\n  \u003cli\u003eLoop conductor diameter: 8.5 mm\u003c\/li\u003e\n\n  \u003cli\u003eConnection cable length: approx. 1.8 m\u003c\/li\u003e\n\n  \u003cli\u003eFunctions: HOLD, MIN\/MAX, battery status, Auto-Power-Off (deactivatable)\u003c\/li\u003e\n\n  \u003cli\u003eBatteries: 3 × 1.5 V micro (AAA\/LR03) included\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement category: CAT IV 600 V\u003c\/li\u003e\n\n  \u003cli\u003eIncluded: protective case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated by AI – subject to errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913819521367,"sku":"CFLEX-2","price":2334.4,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-cflex-2-01a-3ka-med-digitalt-display-true-rms-6322420.jpg?v=1762246571"},{"product_id":"benning-true-rms-ac-dc-milliampere-stromtang","title":"BENNING TRUE RMS AC\/DC milliampere current clamp","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis TRUE RMS milliamp clamp multimeter from BENNING is designed for precise measurement of AC and DC currents. The BENNING CM 11 (item no. 044067) has a resolution of 0.1 mA and provides measurements within specified AC and DC ranges with a stated basic accuracy of 1%. The instrument's features and limitations are described below.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eTRUE RMS measurement for accurate AC and DC readings.\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.1 mA.\u003c\/li\u003e\n\n  \u003cli\u003eBacklit LCD display.\u003c\/li\u003e\n\n  \u003cli\u003eMemory and measurement functions: HOLD, MIN \/ MAX, ZERO.\u003c\/li\u003e\n\n  \u003cli\u003eMaximum jaw opening: 23 mm.\u003c\/li\u003e\n\n  \u003cli\u003eSupplied with protective case.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMeasurement of process signals in the range of 4 mA to 20 mA without breaking the current loop.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement of DC current in the specified measurement ranges (300.0 mA \/ 3.000 A \/ 10.00 A) and AC current in the specified measurement ranges (300.0 mA \/ 3.000 A \/ 20.00 A).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and Accuracy\u003c\/h3\u003e\n\u003cp\u003eThe stated basic accuracy is 1%. The measuring instrument's measurement category is CAT IV 300 V. This information is based on the manufacturer's product information for the BENNING CM 11.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct name: BENNING CM 11 (item no. 044067).\u003c\/li\u003e\n\n  \u003cli\u003eType: TRUE RMS milliamp clamp multimeter.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement ranges (DC): 300.0 mA \/ 3.000 A \/ 10.00 A.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement ranges (AC): 300.0 mA \/ 3.000 A \/ 20.00 A.\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.1 mA.\u003c\/li\u003e\n\n  \u003cli\u003eBasic accuracy: 1 %.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement category: CAT IV 300 V.\u003c\/li\u003e\n\n  \u003cli\u003eMaximum jaw opening: 23 mm.\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: LCD with backlight.\u003c\/li\u003e\n\n  \u003cli\u003eMemory functions: HOLD, MIN \/ MAX, ZERO.\u003c\/li\u003e\n\n  \u003cli\u003eSupplied with protective case.\u003c\/li\u003e\n\n  \u003cli\u003eAbility to measure 4–20 mA process signals without breaking the current loop.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eSource: Information from the manufacturer's product information for the BENNING CM 11.\u003c\/p\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913826697559,"sku":"CM11","price":3503.64,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-true-rms-ac-dc-milliampere-stromtang-2169937.jpg?v=1762246570"},{"product_id":"benning-stromtang-400a-ac-dc-600v-ac-dc-frekvens-kapacitets-maling","title":"BENNING CM 2-1 current clamp meter 400A AC\/DC 600V AC\/DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe BENNING CM 2-1 is a TRUE RMS digital clamp meter. The instrument is designed for non-contact measurement of AC and DC current as well as other electrical quantities, and is presented as BENNING's product CM 2-1, item no. 044689. citeturn1view0\u003c\/p\u003e\n\n\u003ch3\u003eFunctions and Applications\u003c\/h3\u003e\n\u003cp\u003eThe instrument measures AC and DC current from 10 mA up to 400 A and AC\/DC voltage from 100 µV up to 600 V. Additionally, it offers measurement functions for resistance (0.1 Ω–40 MΩ), frequency (0.01 Hz–50 kHz) and capacitance (1 nF–10 mF). These measurements provide an overview of the electrical parameters that the CM 2-1 can determine during inspection and troubleshooting. citeturn1view0\u003c\/p\u003e\n\n\u003cp\u003eThe CM 2-1 operates with the TRUE RMS measurement method, has a stated basic accuracy of 0.5%, and an indication range of 4,000. The jaw opening is 27 mm, which indicates the maximum conductor dimension that can be clamped. The instrument has memory functions (HOLD, MAX\/MIN, ZERO) as well as continuity and diode testing. citeturn1view0\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMeasurement of low currents (specified for automotive and photovoltaics in the manufacturer's product description).\u003c\/li\u003e\n\n  \u003cli\u003eGeneral current and voltage measurement for inspection and troubleshooting (specified by the manufacturer).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThese applications are directly mentioned in the manufacturer's product text and describe the typical use cases for the CM 2-1. citeturn1view0\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Features\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAutoV function for automatic AC\/DC detection and low input impedance (LoZ) to reduce capacitively\/inductively induced voltages.\u003c\/li\u003e\n\n  \u003cli\u003eLow-pass filter (HFR, 800 Hz) for measurements in pulsating motor speed operations and voltage sensor for non-contact phase\/cable break signalling (LCD\/buzzer).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThese functions are specified in the manufacturer's product description and support measurement work with noisy or pulsating signals. citeturn1view0\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: BENNING CM 2-1.\u003c\/li\u003e\n\n  \u003cli\u003eItem no.: 044689.\u003c\/li\u003e\n\n  \u003cli\u003eIndication range: 4,000 (illuminated display).\u003c\/li\u003e\n\n  \u003cli\u003eBasic accuracy: 0.5%.\u003c\/li\u003e\n\n  \u003cli\u003eAC voltage: 100 µV – 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eDC voltage: 100 µV – 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eAC current: 10 mA – 400 A.\u003c\/li\u003e\n\n  \u003cli\u003eDC current: 10 mA – 400 A.\u003c\/li\u003e\n\n  \u003cli\u003eResistance: 0.1 Ω – 40 MΩ.\u003c\/li\u003e\n\n  \u003cli\u003eFrequency: 0.01 Hz – 50 kHz.\u003c\/li\u003e\n\n  \u003cli\u003eCapacitance: 1 nF – 10 mF.\u003c\/li\u003e\n\n  \u003cli\u003eContinuity \/ diode test: yes \/ yes.\u003c\/li\u003e\n\n  \u003cli\u003eMemory: HOLD, MAX\/MIN, ZERO.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement method: TRUE RMS.\u003c\/li\u003e\n\n  \u003cli\u003eMax. jaw opening: 27 mm.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement category: CAT IV 300 V, CAT III 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eScope of delivery (specified): protective case, test leads and batteries included.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is AI-generated – we reserve the right to make errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913841934679,"sku":"CM2-1","price":2263.01,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-stromtang-400a-acdc-600v-acdc-frekvenskapacitets-maling-1577624.jpg?v=1762246570"},{"product_id":"true-rms-laekage-stromtang-benning-cm-9-1","title":"TRUE RMS- Leakage Current-Clamp BENNING CM 9-1","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis leakage current clamp from BENNING is a TRUE RMS leakage current clamp meter with multimeter functions. The BENNING CM 9-1 measures leakage and differential currents and provides measurements of AC current, voltage, resistance, and continuity.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eTRUE RMS leakage current clamp (BENNING CM 9-1).\u003c\/li\u003e\n\n  \u003cli\u003eResolution 1 µA in 6 mA measurement range.\u003c\/li\u003e\n\n  \u003cli\u003eMeasures leakage currents and differential currents.\u003c\/li\u003e\n\n  \u003cli\u003eAC current measurement up to 60 A.\u003c\/li\u003e\n\n  \u003cli\u003eMultimeter functions: voltage measurements up to 600 V, resistance up to 600 kΩ, and continuity test.\u003c\/li\u003e\n\n  \u003cli\u003eClamp opening: 23 mm.\u003c\/li\u003e\n\n  \u003cli\u003eCategory classification: CAT IV 300 V and CAT III 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eSupplied with carrying case, test leads, and batteries (BENNING item number 044682).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eUsed for measuring leakage currents and differential currents, including small current measurements with 1 µA resolution in the 6 mA range.\u003c\/li\u003e\n\n  \u003cli\u003eUsed for AC current measurements up to 60 A as well as for voltage measurements up to 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eUsed for resistance measurements up to 600 kΩ and for continuity testing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003eFurther product information can be found with the manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.benning.de\/products-us\/testing-measuring-and-safety-equipment\/current-clamp-multimeter\/leakage-current-clamp-cm-9-1-cm-9-2.html?sbd=SUI%3Fsbd\" target=\"_blank\" rel=\"noopener\"\u003eSource: manufacturer's product page\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct name: BENNING CM 9-1.\u003c\/li\u003e\n\n  \u003cli\u003eItem number: 044682.\u003c\/li\u003e\n\n  \u003cli\u003eFunction: TRUE RMS leakage current clamp meter.\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 1 µA in 6 mA measurement range.\u003c\/li\u003e\n\n  \u003cli\u003eCurrent measurement: up to 60 A AC.\u003c\/li\u003e\n\n  \u003cli\u003eVoltage measurement: up to 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eResistance: up to 600 kΩ.\u003c\/li\u003e\n\n  \u003cli\u003eContinuity test: yes.\u003c\/li\u003e\n\n  \u003cli\u003eClamp opening: 23 mm.\u003c\/li\u003e\n\n  \u003cli\u003eSafety categories: CAT IV 300 V, CAT III 600 V.\u003c\/li\u003e\n\n  \u003cli\u003eIncluded: carrying case, test leads, and batteries.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right to make errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e","brand":"Benning","offers":[{"title":"PCS","offer_id":51913852551511,"sku":"CM9-1","price":4363.89,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/true-rms-laekage-stromtang-benning-cm-9-1-6313012.jpg?v=1762246570"},{"product_id":"mini-ac-stromtang-400a-til-maks-o-23-mm","title":"Mini AC clamp meter, 400A, for max. Ø 23 mm","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThe BENNING CM P1 is a compact measuring device for current measurement. It is designed as a pocket-friendly TRUE RMS clamp meter with a measurement range for AC current. The functions and specifications of the instrument are provided by the manufacturer and are reproduced here without further assumptions.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eTRUE RMS AC current measurement\u003c\/li\u003e\n\n  \u003cli\u003eHOLD function to freeze measurement values\u003c\/li\u003e\n\n  \u003cli\u003eINRUSH function for inrush current measurement\u003c\/li\u003e\n\n  \u003cli\u003eLPF (low-pass filter) to suppress high-frequency impulses\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrecise measurement of load currents up to 400 A\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement of inrush currents (INRUSH) from motors and lighting installations\u003c\/li\u003e\n\n  \u003cli\u003eUse of LPF to suppress high-frequency impulses in switched motor installations\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003eFor detailed technical data and complete product information, refer to the manufacturer's datasheet:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.benning.de\/files\/benning\/global_content\/downloads\/BENNING_CMP1_CMP2_de.pdf\" target=\"_blank\" rel=\"noopener\"\u003eView manufacturer datasheet\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: BENNING CM P1\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: BENNING\u003c\/li\u003e\n\n  \u003cli\u003ePart number: 044678\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range (AC): 10 mA to 400 A (TRUE RMS)\u003c\/li\u003e\n\n  \u003cli\u003eMax. clamp opening: 23 mm\u003c\/li\u003e\n\n  \u003cli\u003eBasic accuracy: 2 %\u003c\/li\u003e\n\n  \u003cli\u003eFunctions: HOLD, INRUSH, LPF\u003c\/li\u003e\n\n  \u003cli\u003eMeasuring category: CAT III 600 V\u003c\/li\u003e\n\n  \u003cli\u003eDimensions: 149 x 59 x 27 mm\u003c\/li\u003e\n\n  \u003cli\u003eWeight: 140 g\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is AI-generated – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913863201111,"sku":"CM-P1","price":876.59,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/mini-ac-stromtang-400a-til-maks-o-23-mm-3103782.jpg?v=1762246569"},{"product_id":"mini-ac-dc-current-clamp-400a-for-max-o-23-mm","title":"Mini AC\/DC Current Clamp, for max. Ø 23 mm","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis BENNING clamp meter, the BENNING CM P2, is a pocket-sized true RMS AC\/DC clamp meter designed for measuring electrical current up to 400 A. The instrument is described as pocket-sized in the manufacturer's product text and is identified by the manufacturer's item number 044679.\n\n\u003ch3\u003eFunction and Measuring Principle\u003c\/h3\u003e\n\u003cp\u003eThe BENNING CM P2 is described as a true RMS measuring instrument for both AC and DC. Its primary purpose is to measure current using a current clamp, without needing to disconnect wires.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eUsed to measure AC and DC current up to 400 A.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003cp\u003eFor technical details and manufacturer information: \u003ca href=\"https:\/\/www.benning.de\/products-us\/testing-measuring-and-safety-equipment\/current-clamp-multimeter\/pocket-current-clamp-meter-cm-p1-cm-p2.html?cid=71873\u0026amp;file=files%2Fbenning%2Fglobal_content%2Fdownloads%2FBENNING_CMP1_CMP2_de.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eManufacturer: BENNING\u003c\/li\u003e\n\n  \u003cli\u003eModel: BENNING CM P2\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer's item number: 044679\u003c\/li\u003e\n\n  \u003cli\u003eType: Pocket-sized true RMS AC\/DC clamp meter\u003c\/li\u003e\n\n  \u003cli\u003eMeasuring range (specified): up to 400 A\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – subject to errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913874997591,"sku":"CM-P2","price":1207.35,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/mini-acdc-current-clamp-400a-for-max-o-23-mm-7461310.jpg?v=1762246571"},{"product_id":"benning-analog-spaendingstester-12-1000-v-ac-dc","title":"BENNING ANALOG Voltage Tester 12-1000 V AC\/DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis two-pole voltage tester from BENNING, BENNING DUSPOL® analog, is a measuring instrument for detecting and indicating electrical voltage. The BENNING DUSPOL® analog is identified by the manufacturer's article number 050261 and is described as a two-pole voltage tester with functions for both AC and DC measurement.\n\n\u003ch3\u003eFunction and Signalling\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMeasures voltages in the range of 12–1000 V AC\/DC.\u003c\/li\u003e\n\n  \u003cli\u003eVoltage indication occurs through the use of light-emitting diodes (LED) and an electromechanical solenoid movement.\u003c\/li\u003e\n\n  \u003cli\u003ePhase sequence is tested and displayed by an LCD symbol \"R\".\u003c\/li\u003e\n\n  \u003cli\u003eThe device's load connection is activated via a push-button.\u003c\/li\u003e\n\n  \u003cli\u003eAn integrated vibration alarm is indicated as a signalling function.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\nThe manufacturer's product page provides an instruction manual (DUSPOL® analog) as a downloadable PDF. Details and the complete user guide can be found on the manufacturer's product page at BENNING.\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eDetection and measurement of AC or DC voltage within the specified measuring range (12–1000 V).\u003c\/li\u003e\n\n  \u003cli\u003eChecking phase sequence using the LCD indicator \"R\".\u003c\/li\u003e\n\n  \u003cli\u003eVoltage measurement situations where load connection via push-button and vibration alarm are relevant signalling methods.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: BENNING DUSPOL® analog\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: BENNING\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer's article number: 050261\u003c\/li\u003e\n\n  \u003cli\u003eType: Two-pole voltage tester\u003c\/li\u003e\n\n  \u003cli\u003eMeasuring range: 12–1000 V AC\/DC\u003c\/li\u003e\n\n  \u003cli\u003eIndication: LED and solenoid movement; phase sequence shown as LCD \"R\"\u003c\/li\u003e\n\n  \u003cli\u003eProtection class: IP65\u003c\/li\u003e\n\n  \u003cli\u003eOvervoltage category: CAT IV 600 V \/ CAT III 1000 V\u003c\/li\u003e\n\n  \u003cli\u003eAdditional features: Load connection via push-button, vibration alarm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\nNote: The information is taken from the manufacturer's product description and instruction manual provided by BENNING.\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913888006487,"sku":"DUSPOL-ANALOG","price":543.1,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-analog-spaendingstester-12-1000-v-acdc-5480657.jpg?v=1762246568"},{"product_id":"benning-spaendingstester-12-1000-v-ac-1200-vdc","title":"BENNING Voltage tester 12-1000 V AC 1200 V DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eHandheld Voltage Tester\u003c\/h2\u003e\n\u003cp\u003eThis BENNING DUSPOL® digital (item no. 050263) is a handheld voltage tester designed for measuring AC and DC voltages with functions specified by the manufacturer. The device measures AC TRUE RMS 1–1000 V and DC up to 1,200 V, displaying measurement values on a backlit LC display. The DUSPOL® digital is shown with VDE\/GS approval on the manufacturer's website.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Operation\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eDigital LC display with automatic backlight.\u003c\/li\u003e\n\n  \u003cli\u003ePhase sequence\/direction of rotation test and single-pole phase indicator.\u003c\/li\u003e\n\n  \u003cli\u003ePolarity display for DC.\u003c\/li\u003e\n\n  \u003cli\u003eContinuity test with buzzer and yellow LED indicator.\u003c\/li\u003e\n\n  \u003cli\u003eNon-contact cable break detector (non-contact) with yellow LED.\u003c\/li\u003e\n\n  \u003cli\u003eLoad switching via push buttons (built-in vibrator motor during testing) to distinguish real voltages from capacitive\/inductive voltages.\u003c\/li\u003e\n\n  \u003cli\u003eVibration alarm upon load connection; built-in thermal protection for prolonged load.\u003c\/li\u003e\n\n  \u003cli\u003eIP65 enclosure rating and overload categories CAT IV 600 V \/ CAT III 1000 V.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\n\u003cp\u003eFurther product and safety information can be found in the manufacturer's manual. \u003ca href=\"https:\/\/www.benning.de\/files\/benning\/global_content\/downloads\/instruction_manuals\/10065730_duspol_digital_manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's datasheet\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eThe following applications are directly derived from the manufacturer's functional description:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003eChecking and displaying AC voltage in the range 1–1000 V TRUE RMS.\u003c\/li\u003e\n\n  \u003cli\u003eChecking and displaying DC voltage up to 1,200 V as well as polarity determination.\u003c\/li\u003e\n\n  \u003cli\u003eSingle-pole phase indication and phase sequence\/direction of rotation test in grounded networks.\u003c\/li\u003e\n\n  \u003cli\u003eContinuity and diode test as well as localization of cable breaks (non-contact detection).\u003c\/li\u003e\n\n  \u003cli\u003eSeparation of real voltages from capacitive\/inductive interference voltages when a load is connected (load switching).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: BENNING DUSPOL® digital, item no. 050263\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: BENNING\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range AC: 1–1000 V TRUE RMS\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range DC: up to 1,200 V\u003c\/li\u003e\n\n  \u003cli\u003eLow-Volt range: 1.0 V to AC\/DC 11.9 V (resolution 0.1 V)\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.1 V (up to 198.9 V), 1 V (from 199 V)\u003c\/li\u003e\n\n  \u003cli\u003eNominal frequency range: 0–1,000 Hz (according to manufacturer's manual)\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy (low-volt): ±3 % of measured value + 5 digits (specified in manual)\u003c\/li\u003e\n\n  \u003cli\u003eEnclosure rating: IP65\u003c\/li\u003e\n\n  \u003cli\u003eOverload category: CAT IV 600 V \/ CAT III 1000 V\u003c\/li\u003e\n\n  \u003cli\u003eApprovals: VDE\/GS stated on the manufacturer's website\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – subject to errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913911501143,"sku":"DUSPOL-DIGITAL","price":950.09,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-spaendingstester-12-1000-v-ac-1200-vdc-7912436.jpg?v=1762246570"},{"product_id":"benning-spaendingstester-12-1000-v-ac-dc","title":"2-pole voltage tester DUSPOL EXPERT","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis voltage tester from BENNING, DUSPOL® expert (item no. 050262), is a measuring instrument for AC\/DC voltages with a specified measuring range of 12–1000 V. The device is designed for single-pole phase testing and includes functions for phase sequence and polarity indication, as well as continuity testing and non-contact phase testing.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAC\/DC measuring range: 12–1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eSingle-pole phase testing.\u003c\/li\u003e\n\n  \u003cli\u003ePhase sequence indication via green LEDs.\u003c\/li\u003e\n\n  \u003cli\u003ePolarity indication (LED).\u003c\/li\u003e\n\n  \u003cli\u003eContinuity test with acoustic buzzer and yellow LED.\u003c\/li\u003e\n\n  \u003cli\u003eHigh-power white LED for illuminating the measuring point.\u003c\/li\u003e\n\n  \u003cli\u003eNon-contact phase tester \/ cable break detector with yellow flashing LED.\u003c\/li\u003e\n\n  \u003cli\u003eVibration alarm.\u003c\/li\u003e\n\n  \u003cli\u003ePush-button load contact with 30 mA RCD trip capability.\u003c\/li\u003e\n\n  \u003cli\u003eProtection class IP65.\u003c\/li\u003e\n\n  \u003cli\u003eOvervoltage categories: CAT IV 600 V \/ CAT III 1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eVDE\/GS approval (specified by the manufacturer).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eDetermination of AC\/DC voltage presence in the range of 12–1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eSingle-pole phase testing to identify live conductors.\u003c\/li\u003e\n\n  \u003cli\u003eChecking phase sequence using indicating LEDs.\u003c\/li\u003e\n\n  \u003cli\u003eContinuity testing with visual (yellow LED) and acoustic signaling.\u003c\/li\u003e\n\n  \u003cli\u003eNon-contact detection of phase or cable breaks with flashing LED.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003ca href=\"https:\/\/www.benning.de\/products-us\/testing-measuring-and-safety-equipment\/test-equipment-voltage-tester\/voltage-tester-duspol.html\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's product page\u003c\/a\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: BENNING DUSPOL® expert.\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: BENNING.\u003c\/li\u003e\n\n  \u003cli\u003eItem number: 050262.\u003c\/li\u003e\n\n  \u003cli\u003eAC\/DC measuring range: 12–1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eSingle-pole phase testing; phase sequence indication (green LEDs); polarity indication (LED).\u003c\/li\u003e\n\n  \u003cli\u003eContinuity test with buzzer and yellow LED.\u003c\/li\u003e\n\n  \u003cli\u003eHigh-power white LED for measuring point illumination.\u003c\/li\u003e\n\n  \u003cli\u003eNon-contact phase tester \/ cable break detector (yellow flashing LED) and vibration alarm.\u003c\/li\u003e\n\n  \u003cli\u003ePush-button load contact with 30 mA RCD trip capability.\u003c\/li\u003e\n\n  \u003cli\u003eProtection class: IP65.\u003c\/li\u003e\n\n  \u003cli\u003eOvervoltage category: CAT IV 600 V \/ CAT III 1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eApprovals: VDE\/GS (specified by the manufacturer).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913920938327,"sku":"DUSPOL-EXPERT","price":639.75,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-spaendingstester-12-1000-v-acdc-2900485.jpg?v=1762246570"},{"product_id":"multifunktions-installations-tester","title":"TRUE RMS Installation Tester BENNING IT 130","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe BENNING IT 130 is a multifunctional TRUE RMS installation tester for safety testing on electrical installations. The product is designed for measurements and tests in accordance with IEC 60364-6 and EN 50110 and includes functions for determining protective conductor resistance, insulation resistance, line and loop resistance, as well as RCD testing (including types AC, A, F, B, and B+).\u003c\/p\u003e\nciteturn1view0\n\n\u003ch3\u003eMeasurement Functions and User Access\u003c\/h3\u003e\n\u003cp\u003eThe instrument performs, among other things, low-impedance measurement of protective conductors, insulation measurements at 50\/100\/250\/500\/1000 V, line and loop measurements, and RCD tests with AUTO and ramp functions. There is TRUE RMS measurement of voltage, frequency, and phase sequence. All measurement functions are selected directly via a rotary switch, and a graphic backlit display supplemented by clear PASS\/FAIL LED indication simplifies reading and test execution.\u003c\/p\u003e\nciteturn1view0\n\n\u003ch3\u003eData Management and Connections\u003c\/h3\u003e\n\u003cp\u003eThe BENNING IT 130 has internal memory for up to 1,800 measured values and the possibility of structure upload\/download via bidirectional interfaces (USB and RS-232). It has a built-in real-time clock, and the delivery includes PC software for logging and reporting, which supports periodic test documentation.\u003c\/p\u003e\nciteturn1view0\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eAccording to the manufacturer's description, the BENNING IT 130 is used for safety testing and systematic recording of measurements during installation tests. The combination of memory, PC software, and PASS\/FAIL indicator makes the device suitable for repeated tests and structured documentation in connection with installation testing.\u003c\/p\u003e\nciteturn1view0\n\n\u003cp\u003eThe scope of delivery includes, among other things, the switchable \"Commander\" probe tip, USB\/RS-232 cable and PC software, test leads, charger with 6x NiMH AA batteries, carrying case, and calibration certificate.\u003c\/p\u003e\nciteturn1view0\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eItem number: 044103.\u003c\/li\u003e\n\n  \u003cli\u003eTest standards: IEC 60364-6, EN 50110.\u003c\/li\u003e\n\n  \u003cli\u003eRCD test: types AC, A, F, B, B+ (AUTO, ramp test, tripping time, tripping current, contact voltage).\u003c\/li\u003e\n\n  \u003cli\u003eInsulation resistance test at 50 \/ 100 \/ 250 \/ 500 \/ 1000 V.\u003c\/li\u003e\n\n  \u003cli\u003eLow-impedance protective conductor: 0.01 Ω – 2 kΩ.\u003c\/li\u003e\n\n  \u003cli\u003eInsulation resistance: 10 kΩ – 1000 MΩ.\u003c\/li\u003e\n\n  \u003cli\u003eLine and loop resistance: 0.01 Ω – 10 kΩ.\u003c\/li\u003e\n\n  \u003cli\u003eVoltage (TRUE RMS): 1 V – 550 V; Frequency: 0 Hz – 500 Hz.\u003c\/li\u003e\n\n  \u003cli\u003eEarth resistance with earth kit: 0.01 Ω – 2000 Ω.\u003c\/li\u003e\n\n  \u003cli\u003eTRUE RMS current (with clamp): 0.1 mA – 400 A.\u003c\/li\u003e\n\n  \u003cli\u003eMemory for up to 1,800 measured values; built-in real-time clock.\u003c\/li\u003e\n\n  \u003cli\u003eInterfaces: bidirectional USB and RS-232; incl. PC software.\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: 6 x NiMH AA rechargeable batteries; integrated battery charging function.\u003c\/li\u003e\n\n  \u003cli\u003eIncludes: \"Commander\" probe tip (with PASS\/FAIL LED), test leads, charger, carrying case, and calibration certificate.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913935192407,"sku":"IT130","price":21481.4,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/multifunktions-installations-tester-7830893.jpg?v=1762246570"},{"product_id":"benning-true-rms-digital-multimeter","title":"TRUE-RMS Digital Multimeter BENNING MM 2-3","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis description covers the BENNING MM 2-3 (item no. 044693), a digital multimeter from BENNING's TRUE RMS series. The BENNING MM 2-3 provides measurements of voltage, resistance, frequency, continuity, and diode. Additionally, the instrument supports TRUE RMS current measurement, capacitance measurement, and temperature measurement with an included wire temperature sensor from -40 °C to +400 °C.\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eTRUE RMS measurement method.\u003c\/li\u003e\n\n  \u003cli\u003eClear, backlit 6,000-count display.\u003c\/li\u003e\n\n  \u003cli\u003eJack control with visual and acoustic warning for the A ranges.\u003c\/li\u003e\n\n  \u003cli\u003eMIN \/ MAX \/ AVG and REL functions.\u003c\/li\u003e\n\n  \u003cli\u003eRobust rubber-coated holster.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery and Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMultimeter BENNING MM 2-3 (item no. 044693).\u003c\/li\u003e\n\n  \u003cli\u003eHigh-quality silicone test leads with gold-plated 2 mm and screw-socket 4 mm probes.\u003c\/li\u003e\n\n  \u003cli\u003eCarrying case.\u003c\/li\u003e\n\n  \u003cli\u003eWire temperature sensor (specified as included with MM 2-3).\u003c\/li\u003e\n\n  \u003cli\u003eBatteries.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct name: BENNING MM 2-3.\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: BENNING.\u003c\/li\u003e\n\n  \u003cli\u003eItem number: 044693.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement functions: voltage, resistance, frequency, continuity, diode.\u003c\/li\u003e\n\n  \u003cli\u003eAdditional measurement functions: TRUE RMS current measurement, capacitance.\u003c\/li\u003e\n\n  \u003cli\u003eTemperature range: -40 °C to +400 °C (with wire temperature sensor).\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: backlit 6,000-count display.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement functions\/logic: MIN \/ MAX \/ AVG, REL.\u003c\/li\u003e\n\n  \u003cli\u003eSafety\/use: jack control with visual\/acoustic warning for A ranges.\u003c\/li\u003e\n\n  \u003cli\u003ePhysical: robust rubber-coated holster (specified by the manufacturer).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eSource: \u003ca href=\"https:\/\/www.benning.de\/products-us\/testing-measuring-and-safety-equipment\/digital-multimeter\/multimeter-mm-2-3-mm-2-2-mm-2-1.html\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's product page\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913953509719,"sku":"MM2-3","price":1391.11,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-true-rms-digital-multimeter-9597146.jpg?v=1762246570"},{"product_id":"benning-taske-til-pv1-1-pv-2","title":"Benning bag for PV1-1\/PV 2","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eShoulder\/Neck Bag for BENNING PV 2\u003c\/h2\u003e\n\nThis Umhängetasche 050426 from BENNING is a shoulder\/neck bag intended as a carrying solution for the BENNING PV 2 test instrument. The product is documented on BENNING's product page and in manufacturer material as an accessory that allows measurements to be performed hands-free at hard-to-reach and potentially dangerous measuring points.\n\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\nThe Umhängetasche 050426 is listed by BENNING as a carrying\/neck bag (\"Bag with neck strap for PV 1-1 \/ PV 2 (050426)\") and is indicated as an optional accessory in the PV 2 kit overview. BENNING describes the bag's functionality as enabling hands-free work at difficult-to-access and dangerous measuring points.\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\n\u003ca href=\"https:\/\/www.benning.de\/produkte\/pruef-und-messtechnik\/messgeraete-fuer-photovoltaik-vde-0126-23\/photovoltaik-installationstester-pv-2.html?cid=53707\u0026amp;file=files%2Fbenning%2Fglobal_content%2Fdownloads%2Finstruction_manuals%2Fbenning_pv2_manual_de.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eEnables hands-free work with BENNING PV 2 in situations where the operator needs both hands free, as described on the manufacturer's product page.\u003c\/li\u003e\n\n  \u003cli\u003eUsed at measuring points that are difficult to access or characterized as dangerous, according to the manufacturer's description.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eManufacturer: BENNING.\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer's article number: 050426.\u003c\/li\u003e\n\n  \u003cli\u003eProduct name (manufacturer's designation): Umhängetasche \/ Bag with neck strap for PV 1-1 \/ PV 2 (050426).\u003c\/li\u003e\n\n  \u003cli\u003eDescription: Shoulder\/neck bag for BENNING PV 2 (optional accessory in PV 2 kit).\u003c\/li\u003e\n\n  \u003cli\u003eFunction: Enables hands-free work at hard-to-reach and dangerous measuring points (according to the manufacturer's product text).\u003c\/li\u003e\n\n  \u003cli\u003eCompatibility indicated by manufacturer: BENNING PV 1-1 and PV 2.\u003c\/li\u003e\n\n  \u003cli\u003eNote: There is no separate dedicated datasheet or product video for article number 050426 on the manufacturer's website according to the manufacturer's materials.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated with AI – subject to errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"Benning","offers":[{"title":"PCS","offer_id":51913970942295,"sku":"PV-TASKE","price":851.66,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/benning-taske-til-pv1-1pv-2-2103253.jpg?v=1762246569"},{"product_id":"benning-pv-125-photovoltaic-installationtester-1500v-25a","title":"BENNING PV 125 Photovoltaic installationtester 1500V\/25A","description":"\u003ch1\u003eBENNING PV 125 – Installation Tester for Solar PV Systems up to 1500 V\u003c\/h1\u003e\n\u003cp\u003eThe BENNING PV 125 is a professional installation tester for commissioning, verification, and periodic inspection of solar PV systems up to 1500 V DC. The instrument is designed for installers, service companies, and technicians working with modern high-voltage solar installations who require fast, precise, and documented testing according to applicable standards.\u003c\/p\u003e\n\u003cp\u003eWith the ability to measure open-circuit voltage up to 1500 V DC, short-circuit current up to 25 A, and insulation resistance up to 1500 V, the BENNING PV 125 is a complete tool for troubleshooting, quality assurance, and mandatory documentation of PV installations.\u003c\/p\u003e\n\u003ch2\u003eEfficient Testing of Solar PV Systems According to EN 62446\u003c\/h2\u003e\n\u003cp\u003eThe BENNING PV 125 supports testing procedures according to EN 62446-1 and EN 62446-2, making the instrument suitable for both new installations and periodic inspections of grid-connected solar PV systems.\u003c\/p\u003e\n\u003cp\u003eThe automatic test sequences enable complete measurements to be performed in seconds, reducing field time and ensuring consistent measurement results.\u003c\/p\u003e\n\u003cp\u003eThe instrument can perform, among other things:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMeasurement of open-circuit voltage (Voc) up to 1500 V DC\u003c\/li\u003e\n\n\u003cli\u003eMeasurement of short-circuit current (Isc) up to 25 A DC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance measurement (Riso\/Rinsu) up to 999 MΩ\u003c\/li\u003e\n\n\u003cli\u003eProtective conductor measurement (Rpe)\u003c\/li\u003e\n\n\u003cli\u003ePower measurement on PV strings\u003c\/li\u003e\n\n\u003cli\u003eOperating current measurement via BENNING CM 3-PV clamp meter\u003c\/li\u003e\n\n\u003cli\u003eSolar irradiance and temperature measurement via BENNING SUN 3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eFast Documentation and Cloud Integration\u003c\/h2\u003e\n\u003cp\u003eOne of the major advantages of the BENNING PV 125 is its integrated memory for up to 1000 automatic measurements. Measurements can be organized by object, inverter, and string, providing a clear overview for larger installations.\u003c\/p\u003e\n\u003cp\u003eVia Bluetooth, data can be transferred to the BENNING Test Equipment Cloud (BTEC), where documentation, reporting, and administration of measurements become significantly easier. The cloud platform supports Windows, Mac, Android, and iOS and allows for professional documentation of performed test tasks.\u003c\/p\u003e\n\u003ch2\u003eDesigned for Modern PV Installations\u003c\/h2\u003e\n\u003cp\u003eThe BENNING PV 125 has been developed with a focus on user-friendliness in the field. The colored 3.5\" display, intuitive navigation buttons, and automated test procedures make the instrument easy to use – even under demanding working conditions.\u003c\/p\u003e\n\u003cp\u003eThe built-in lithium-ion battery ensures long operating time, while OTA (Over The Air) updates allow for continuous firmware updates of the instrument.\u003c\/p\u003e\n\u003cp\u003eTogether with the BENNING SUN 3 and BENNING CM 3-PV, the instrument provides a complete solution for professional testing and documentation of solar PV systems.\u003c\/p\u003e\n\u003ch2\u003eAdvantages of BENNING PV 125\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eTesting of PV systems up to 1500 V DC\u003c\/li\u003e\n\n\u003cli\u003eShort-circuit current measurement up to 25 A\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance measurement up to 1500 V test voltage\u003c\/li\u003e\n\n\u003cli\u003eComplies with EN 62446-1 and EN 62446-2\u003c\/li\u003e\n\n\u003cli\u003eAutomatic test sequences\u003c\/li\u003e\n\n\u003cli\u003eMemory for 1000 PV strings\u003c\/li\u003e\n\n\u003cli\u003eBluetooth® and LoRa communication\u003c\/li\u003e\n\n\u003cli\u003eIntegration with BENNING Test Equipment Cloud (BTEC)\u003c\/li\u003e\n\n\u003cli\u003eOTA firmware updates\u003c\/li\u003e\n\n\u003cli\u003eCAT IV 1000 V safety category\u003c\/li\u003e\n\n\u003cli\u003eSuitable for installation, service, and periodic inspection of solar PV systems\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cp\u003eManufacturer: BENNING\u003cbr\u003eModel: PV 125\u003cbr\u003eProduct type: Installation tester for solar PV systems\u003cbr\u003eMeasurement range open-circuit voltage (Voc): 10 – 1500 V DC\u003cbr\u003eMeasurement range short-circuit current (Isc): 0.5 – 25 A DC\u003cbr\u003eInsulation resistance measurement: 0.05 MΩ – 999 MΩ\u003cbr\u003eTest voltages: 250 V \/ 500 V \/ 1000 V \/ 1500 V\u003cbr\u003eProtective conductor measurement (Rpe): 0.05 Ω – 199 Ω\u003cbr\u003eMemory: 1000 measurements\u003cbr\u003eCommunication: Bluetooth®, LoRa, OTA update\u003cbr\u003eDisplay: 3.5\" color display\u003cbr\u003eSafety category: CAT IV 1000 V\u003cbr\u003eDimensions: 265 × 115 × 78 mm\u003cbr\u003eWeight: 1 kg\u003cbr\u003eItem number: 10241491\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/Benning_PV125.pdf?v=1780922999\" target=\"_blank\" title=\"Product sheet Benning_PV125\" rel=\"noopener\"\u003eProduct sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Benning","offers":[{"title":"PCS","offer_id":53734904725847,"sku":"PV125","price":24477.81,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_b820d9f7-0401-41c8-bef8-523abec3b372.png?v=1780922424"}],"url":"https:\/\/hinonline.com\/collections\/benning.oembed","provider":"HIN A\/S","version":"1.0","type":"link"}