STAUBLI 01.0474 EBB8-V0
STAUBLI 01.0474 is a slide-in socket for Stäubli's EBB8-V0 plug-in system. It is used when a compact and secure connection is desired, which can be assembled and disassembled in an installation. This is the pre-assembled socket with a nominal pin/socket diameter of 8 mm and for conductors up to 35 mm².
In practice, it is relevant in systems where high current carrying capacity and a robust connection are required. It is rated for 160 A, and the contact resistance is 60 µΩ, which helps to keep losses down in the connection itself. At the same time, it is built for 500 V and has a test voltage of 3.3 kV at 50 Hz, as well as a flashover voltage of over 4 kV.
The mechanical part is also clearly specified: the connection has an M8 threaded bolt, a maximum tightening torque of 6 Nm, and a withdrawal force of 20 N. The insulation material is PA66, so the part is made as a fixed part of a current-carrying plug-in system and not as a loose cable connection.
See datasheet from the manufacturer
Typical applications
The EBB8-V0 is part of Stäubli's slide-in systems, where a quick and controlled connection of power connections in technical installations is desired.
Specifications
- Manufacturer: STAUBLI
- MPN: 01.0474
- Type: EBB8-V0
- Nominal pin/socket diameter: 8 mm
- Conductor cross-section: 35 mm²
- Rated voltage: 500 V
- Test voltage (50 Hz, 1 min.): 3.3 kV
- Flashover voltage (50 Hz): > 4 kV
- Rated current: 160 A
- Contact resistance: 60 µΩ
- Short-circuit current (1 s): 3 kA
- Short-circuit current (3 s): 1.5 kA
- Threaded bolt connection: M8
- Maximum tightening torque: 6 Nm
- Withdrawal force: 20 N
- Insulation material: PA66
The content is generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.