STAUBLI LB-I2R 23.0030-20
The STAUBLI LB-I2R is an insulated panel-mount socket for 2 mm systems. It is used when a secure and robust connection through a prepared hole in a panel is desired, and when the connection must also be electrically insulated. The socket itself is made of machined brass and has a metal threaded sleeve on the insulation, allowing it to be screwed firmly into the panel.
In practice, it is a component typically found in test setups and other equipment where a small, safe, and controlled connection is required. The flat connection tab of 2.8 x 0.8 mm makes it easy to connect to internal wiring, and the M6x0.5 thread simplifies installation in a pre-drilled panel.
The stated ratings are 30 V AC / 10 A and 60 V DC / 10 A, making it suitable for applications involving low voltages and limited current. The contact material is CuZn with an Optalloy surface treatment, which provides the actual electrical contact surface.
No specific accessory part is included here, but the datasheet refers to the flat plug socket FSH2.8x0.8 as an accessory. The component is also designated as a test accessory according to IEC EN 61010-2-030.
See datasheet from the manufacturer
Specifications
- Manufacturer: STAUBLI
- MPN: 23.0030-20
- Insulated Ø2 mm rigid panel-mount socket
- Material: machined brass
- Contact material: CuZn
- Surface treatment: Optalloy
- Thread: M6x0.5
- Connection: flat connection tab 2.8 x 0.8 mm
- Ratings: 30 V AC / 10 A and 60 V DC / 10 A
- Mounted with screw in pre-drilled panels
- Designated as test accessory according to IEC EN 61010-2-030
The content is generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.