Linear Blade for MAESTRO 3 / MAESTRO 4M
The linear blade MAESTRO 3, MAESTRO 4M is a spare part from CAB designed for use in MAESTRO machines. The documentation identifies this linear blade as the blade used for separation on the solder side in relevant MAESTRO models. The description and installation instructions from the manufacturer define the purpose and necessary inspection points for replacement.
Installation and Adjustment
The installation instructions from CAB highlight the following procedures and conditions that must be followed when changing the linear blade:
- After replacement, the flat (front) sides of the upper and lower blades must be flush to ensure correct function.
- The lateral position can be checked with an optional dial gauge solution; to compensate for any displacement, the upper blade can be dismantled, and the number of shims on the axle can be changed.
- The delivery includes two shims DIN988-15x21x0.1 (Art.-Nr. 5903026) intended for position adjustment.
- To prevent premature wear, it is recommended to check and, if necessary, readjust the height adjustment of the upper blade, especially the bottom stop, so that the upper and lower blades in their deepest position only lightly touch each other without jamming.
- Scratches or nicks may occur on the blade after straightening during production; the manufacturer states that these do not affect functionality.
Documentation
For further technical details and installation instructions, please refer to the manufacturer's complete documentation.
See data sheet from the manufacturer
Specifications
- Manufacturer: CAB
- Product Name: Linear Blade MAESTRO 3, MAESTRO 4M
- Manufacturer part number: 8933394
- Item No. in manufacturer document: 8933394.001
- Compatible models (indicated in documentation): MAESTRO 3, MAESTRO 4M
- Contents: Two shims DIN988-15x21x0.1 (Art.-Nr. 5903026) included
- Installation and spare part reference number for instruction: Art.-Nr. 9008622
- Note: Blades may show notches/scratches from straightening; according to the manufacturer, these do not affect function
The content is generated using AI – we reserve the right to make errors.
Contact HIN for further information about the product.