CAL CMAD 1614
CAL CMAD 1614 is a calibration fixture for CMAD 1614, used to calibrate or verify the performance of the common mode absorption device. In practice, it is an aid that allows for the establishment of a known and controlled measurement situation, making the result more reliable.
The fixture consists of an aluminum base plate with two side plates, which can be adjusted in height and position. Each side plate is equipped with an N-connector and an inner conductor holder. Several inner conductors with a 4 mm diameter are also included in the delivery. This construction allows for the adaptation and control of the inner conductor's placement before the actual measurement is carried out.
It is intended for measurements according to CISPR 16-1-4, sections 9.5 and 9.6, and is used with TRL calibration on a vector network analyzer. This is relevant in a professional test setup where one wants to ensure that the CMAD 1614 is correctly positioned before further measurements are taken. During calibration, the selected height must not be changed, as this would otherwise affect the result.
The frequency range is specified from 30 MHz to 200 MHz, while the usable frequency range is 10 MHz to 1 GHz.
See datasheet from the manufacturer
Typical applications
- Calibration of CMAD 1614
- Verification of measurement setup according to CISPR 16-1-4
- Preparation of TRL calibration on vector network analyzer
Specifications
- Manufacturer: INSTRUMENT
- MPN: CAL CMAD 1614
- Frequency range: 30 MHz - 200 MHz
- Usable frequency range: 10 MHz - 1 GHz
- Material: Aluminum
- Dimensions: 113 x 150 x 788 mm
- Weight: 2.2 kg
- Inner conductor diameter: 4 mm
- Minimum inner conductor height: 28 mm
- Maximum inner conductor height: 48 mm
- GTIN/EAN: not specified in verified sources
The content has been generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.