Heat-shrink end cap: CEC
CEC is an adhesive-lined, cross-linked polyolefin heat-shrink end cap from DSG‑CANUSA designed to protect and insulate cable ends. The product is used as a stop-end to seal against environmental influences and to provide electrical insulation for cable terminations.
Description and function
The adhesive lining (thermoplastic liner) ensures an environmentally tight seal around the cable end after heating. CEC has a shrink ratio of over 2:1 and is UV-stabilized with resistance to chemicals and solvents, as documented in the manufacturer's data sheet. The product series is classified according to IEC 62677 and ESI 09-11.
Key features
- Shrink ratio: >2:1
- UV-stabilized
- Adhesive-lined (thermoplastic liner) for environmental sealing
- Resistance to chemicals and solvents
- Rated for 1000 V for stop-ends under load
Typical applications
- Sealing cables against moisture (specified in the manufacturer's data sheet)
- Use as a stop-end rated for 1000 V under load (specified in the manufacturer's data sheet)
Documentation
Specifications
- Product name: CEC (example size specified: CEC 63/24)
- CEC 63/24: expanded 63.0 mm, recovered 24.0 mm
- Nominal total wall thickness for CEC 63/24: 3.6 mm
- Pack size for CEC 63/24: 50 pcs.
- Material: modified PE, lead and cadmium-free
- Continuous operating temperature: -40°C to 100°C
- Shrink (recovery) temperature: minimum 125°C
- Shrink ratio: >2:1
- Tensile strength: 10 MPa (IEC 62677-2)
- Elongation: 300% minimum (IEC 62677-2)
- Dielectric strength: >12 kV/mm (IEC 60243)
- Specific volume resistivity: 10^12 Ω·cm (IEC 62677-2)
The content is AI-generated – we reserve the right for errors.
Contact HIN for further information about the product.