Product Description
The Statguard Low Residue Floor Stripper from DESCO is a non-ammoniated, phosphate-free, and biodegradable floor stripper designed to dissolve and lift multiple layers of Statguard floor finish and similar polymer-based floor finishes. The product (part number 220523) is supplied as Desco Europe 10-liter bag-in-box.
Features
- Non-ammoniated, phosphate-free formulation
- Biodegradable
- Formulated to remove multiple layers of Statguard and similar polymer-type finishes
- Recommended for use on vinyl, concrete, rubber, terrazzo, quarry tile, brick, slate, and unglazed ceramic
- Not recommended for asphalt tiles or linoleum
Documentation
For technical details and instructions, please refer to the manufacturer's technical bulletin:
Typical Applications
Statguard Low Residue Floor Stripper is used for removing multiple layers of Statguard floor finish and similar polymer-type floor finishes from surfaces specified by the manufacturer. The product is suitable for treating the following surfaces, as indicated in the manufacturer's technical bulletin:
- Vinyl
- Concrete
- Rubber
- Terrazzo
- Quarry tile
- Brick
- Slate
- Unglazed ceramic
The product is not recommended for asphalt tiles or linoleum; test for discoloration in a small area before full application, as indicated in the datasheet.
Application Procedure (brief)
- Sweep or remove loose dirt.
- Mix stripper with warm water at the correct dilution ratio (see datasheet), apply, and let sit for 3–7 minutes without allowing it to dry.
- Machine scrub with a 175 RPM scrubbing/stripping machine and synthetic pad (black or green) or use a cotton mop.
- Pick up or remove dissolved finish with a wet/dry vac or mop, repeat if necessary.
- Neutralize and rinse thoroughly with recommended Statguard Neutralizer (46022) or rinse multiple times with warm water until pH 7.0 is achieved.
Specifications
- Product Name: Statguard Low Residue Floor Stripper
- Manufacturer: DESCO
- Manufacturer Part Number (Desco Europe): 220523 (10 L bag-in-box)
- Formulation: Non-ammoniated, phosphate-free, biodegradable
- pH: 10–11
- Color: Light red
- % Solids: 2%
- Solubility in water: 100%
- % Volatile by wt.: 98%
- Density (stated): 8.38 lbs/gal (1 kg/L) at 70% (as stated in technical bulletin)
- VOC: 3% at 5:1 dilution; 9% at 1:1 dilution (per method 310, stated in technical bulletin)
- Recommended dilution ratios and coverage (stated in technical bulletin):
- 1 part stripper : 5 parts water — approx. 600 ft² (14.7 m² per liter) (Light to Medium build-up)
- 1 part stripper : 1 part water — approx. 200 ft² (4.9 m² per liter) (Heavy)
- 1 part stripper : 0.5 parts water — approx. 100 ft² (2.5 m² per liter) (Heavy Aged)
Source: DESCO technical bulletin TB-7026 (see link under documentation).
The content has been generated using AI – we reserve the right for errors.
Contact HIN for further product information.