Product Overview
ANE2-M4 is a pre-insulated ring terminal from CEMBRE in the ANE-M series, developed for connecting copper conductors. The product is explicitly specified for flexible copper conductors of 10 mm² and uses an M4 screw with a stated diameter of 4.3 mm. The wire end of the terminal is made of electrolytic copper with a purity exceeding 99.9%, is annealed and tin-plated.What it Does
The ANE2-M4 functions as a mechanical and electrical connection between a flexible copper conductor and a screw connection using a ring terminal. The pre-insulated polyamide (PA 6.6) sleeve has a funnel-shaped entry, which facilitates the insertion of the conductor and reduces the risk of breakage at the solder joint entry.
Installation and Handling
- Select the correct connector according to the conductor size as indicated in the manufacturer's table.
- Use the correct tool and appropriate dies as indicated in the table.
- Strip the conductor's insulation to the length recommended in the table, without damaging individual strands.
- Insert the conductor into the terminal and perform one crimp in the middle of the terminal's barrel according to the tool's operating and maintenance manual.
- The product is intended for single use — do not reuse.
Documentation
Specifications
- Product name: ANE2-M4 (ANE-M series)
- Manufacturer: CEMBRE
- Manufacturer's item number: 2408820
- Application: For flexible copper conductors, 10 mm²
- Screw: M4 (stated diameter 4.3 mm)
- Wire end material: Electrolytic copper, >99.9% pure, annealed, tin-plated (tin plating min. 3 µm)
- Insulation sleeve: Polyamide PA 6.6 with funnel-shaped entry
- Listed for: UL486A-486B (UL) and CSA C22.2
- Voltage: 600 V max. (building wiring)
- Max. operating temperature: 105 °C
- Flammability: V-2
- Note: Single use; sold only with installation instructions
Content generated using AI – we reserve the right for errors.
Contact HIN for further product information.