Ring Terminal – DR150-10N
The DR150-10N is a DR-N ring terminal from CEMBRE designed for copper conductors. The product is a crimp-type cable terminal in accordance with DIN 46235 and is specified for a wire cross-section of 150 mm².
What the product is and how it is used
The DR150-10N serves as a mechanical and electrical connection between a copper conductor and a bolted anchorage using crimping. The terminal is designed for use with copper conductors and is installed by inserting the stripped conductor into the barrel and performing the recommended crimps with appropriate tools and dies as indicated by the manufacturer.
- Crimp-type for electrical connection
- For copper conductors, tinned surface
- Designed for M10 screw fastening with 10.5 mm eye opening
Installation and Documentation
The manufacturer's installation instructions specify the selection of the correct terminal size, appropriate crimping tool, and stripping length before crimping. For the DR150-10N, the stripping length is stated as 43 mm in the manufacturer's table. Further installation and technical information can be found in the manufacturer's datasheet.
Specifications
- Type: DR150-10N (DR-N ring terminal)
- Conductor cross-section: 150 mm²
- Screw: M10
- Eye diameter: 10.5 mm
- Material: electrolytic copper, purity > 99.9%
- Surface: tinned (min. 3 µm)
- Standard: in accordance with DIN 46235
- UL-listing: UL486A-486B, file no. E125401 (US & Canada)
- Operating temperature: −50 °C to 150 °C
- Stripping length (manufacturer's table): 43 mm
- Application: for use with copper conductors, crimp-type terminal
The content has been generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.