Cembre DR185-12N — ring terminals from the DR‑N family
The Cembre DR185-12N is a ring terminal from Cembre designed for copper conductors with a cross-section of 185 mm². The product is part of the DR‑N series and is designed as a crimp-type wire termination intended for mechanical fastening with a screw/stud.
Installation and assembly
The DR185-12N is installed using a crimping process. The manufacturer's instructions clearly state the following steps:
- Select the correct connector for the Cu conductor size used.
- Select appropriate crimping tools and die sets as indicated by the manufacturer.
- Strip the cable to the recommended length (44 mm) without damaging individual strands.
- Insert the conductor into the barrel.
- Apply the specified number of crimps, starting from the tongue side.
Material and standards
The DR185-12N is made of electrolytic copper with a specified purity of approx. 99.9% and is tin-plated. The product is specified in accordance with DIN 46235, and the supplier's documentation indicates listing according to UL486A‑486B (File no. E125401) for the USA and Canada.
The product is intended for use with copper conductors and is designed as a crimp connection, according to the manufacturer's installation instructions.
Documentation
Specifications
- Manufacturer: Cembre
- Type/Part number: DR185-12N
- Family: DR‑N
- Conductor cross-section: 185 mm²
- Screw thread/size: M12
- Stud hole inner diameter (ØD): 13 mm
- Overall length (L): 97.5 mm
- Recommended stripping length: 44 mm
- Material: electrolytic copper (~99.9%) with tin plating
- Standards/compliance: DIN 46235; UL486A‑486B (File no. E125401)
- Packaging: minimum unit 5 pcs; standard unit 25 pcs.
- For use with: copper conductors; crimp-type wire termination
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.