CEC 10/4 — Adhesive-lined heat-shrink end cap
Product Description
The CEC 10/4 is an adhesive-lined, heat-shrink tube-based end cap from DSG-Canusa designed for electrical insulation and environmental sealing of cable ends. The product is part of the CEC series of cross-linked polyolefin end caps and comes with a thermoplastic adhesive lining that provides sealing upon shrinking. The CEC 10/4 is specified with an expanded inner diameter of 10.0 mm and a recovered inner diameter of 4.0 mm.
- Material: modified PE / cross-linked polyolefin (as stated by the manufacturer)
- Adhesive lining: thermoplastic adhesive-lined
- UV-stabilized (stated by the manufacturer)
Documentation
See datasheet from the manufacturer
Typical Applications
- Sealing cables against moisture (stated in the manufacturer's typical applications)
- Use as a stop-end rated for 1000 V under load (stated in the manufacturer's typical applications)
The description of the CEC 10/4 shows that the product is supplied for purposes where cable ends need to be electrically insulated while also achieving an environmental seal via the internal adhesive. Shrinking requires heating to at least the manufacturer's specified shrink temperature for proper dimensional recovery.
Specifications
- Model: CEC 10/4
- Expanded internal diameter (min): 10.0 mm
- Recovered internal diameter: 4.0 mm
- Nominal total wall thickness: 2.00 mm
- Minimum length: 35 mm
- Recommended diameter range: 4.5–8.0 mm
- Shrink ratio: >2:1
- Continuous operating temperature: -40°C to 100°C
- Shrink temperature: 125°C minimum (stated by the manufacturer)
- Material information: modified PE / cross-linked polyolefin; free of lead and cadmium (stated in datasheet)
- Rating: 1000 V for stop ends under load (stated by the manufacturer)
The content has been generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.