Product Overview
The CEC 63/24 is an adhesive-lined, shrinkable cross-linked polyolefin heat shrink cap from DSG-CANUSA, designed for electrical insulation and environmental sealing of cable ends. The product provides a thermoplastic, adhesive internal seal and reduces the exposure of cable terminations to moisture and contaminants.Product Details
- Material: cross-linked polyolefin with an adhesive-lined internal seal (thermoplastic liner).
- Shrink ratio: >2:1.
- Minimum shrink temperature: 125°C.
- UV-stabilized material.
- Packaged in quantities of: 50 pcs for CEC 63/24 (black, BK option specified in the datasheet).
Typical Applications
- Sealing of cables against moisture – indicated in the manufacturer's datasheet.
- Use as a stop end under load, where the product is specified for 1000 V for stop ends under load (indicated in the datasheet's typical applications).
Practical Selection and Ordering
The size CEC 63/24 is specified with an expanded diameter of 63 mm and a recovered diameter of 24 mm. The manufacturer recommends a diameter range of 28–55 mm, and the total wall thickness (nom.) for this size is listed as 3.6 mm in the datasheet. When selecting, choose a dimension that can shrink tightly over the actual application, as limited recovery can reduce the final wall thickness.
See datasheet from the manufacturer
Specifications
- Product: CEC 63/24
- Manufacturer: DSG-CANUSA
- Material: crosslinked polyolefin with adhesive-lined thermoplastic liner
- Shrink ratio: >2:1
- Minimum shrink temperature: 125°C
- Operating temperature (continuous): -40°C to 100°C
- UV-stabilized: yes
- Expanded diameter: 63 mm
- Recovered diameter: 24 mm
- Recommended diameter range: 28–55 mm
- Total wall thickness (nom.): 3.6 mm
- Packaging quantity: 50 pcs
- Rated for 1000 V for stop ends under load (indicated in the datasheet's typical applications)
- Standards indicated in the datasheet: IEC 62677; ESI 09-11
The content is generated using AI – we reserve the right for errors.
Contact HIN for further product information.