STAUBLI MSW-16BL-PP
The MSW-16BL-PP is a small microswitch for the Stäubli 16BL / 16BL-PP panel plug. It is used as an auxiliary contact, indicating that the plug is in place just before the interlock is fully closed. This provides a clear signal about the lock status in the installation.
The microswitch is mounted directly onto the plug with PT screws. It features a changeover contact and three connections with 2.8 x 0.5 mm spade terminals, allowing it to integrate into the existing setup around the 16BL-PP system.
In practice, it is a spare part or accessory used to monitor whether the connection is correctly established without altering the fundamental design of the plug system itself. This is particularly relevant in systems with panel-mounted connections where mechanical status indication close to the plug is desired.
The specified breaking and making capacity varies depending on the application: IEC applications are rated at 6 A at 250 VAC, while UL applications are rated at 5 A at 125/250 VAC and 1 A at 48 V DC.
Typical applications
- Status indication of locked/unlocked connection on Stäubli 16BL-PP panel plug
- Panel-mounted solutions where lock status needs to be readable via a microswitch
- Setups with 16BL / 16BL-PP where additional electrical feedback is desired
Specifications
- Manufacturer: STAUBLI
- MPN: 140106
- Type: MSW-16BL-PP
- For Stäubli 16BL / 16BL-PP panel plug
- Mounted with PT screws
- Changeover contact
- 3 spade terminals, 2.8 x 0.5 mm
- IEC applications: 6 A at 250 VAC
- UL applications: 5 A at 125/250 VAC
- UL applications: 1 A at 48 V DC
- See datasheet from the manufacturer
The content has been generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.