Product Overview
The Empty Metron Marker is an empty Metron Marker pen from METRON, intended to be filled with the user's own marking or process fluid. The product is supplied as part number EP for the Standard tip; a Microtip variant is available under part number EPM. The description below follows the specifications and instructions for use provided by METRON itself.
Application and Function
The Empty Metron Marker functions as an empty dispensing tool; the fluid is filled by the user, and dosing is mechanically controlled by finger pressure on the pen's body. METRON's guide for the Metron Marker states that liquid material is activated and controlled by shaking the pen with the cap on, removing the cap, and pressing the pen to produce dots or continuous lines. For drawing or spot marking, short, controlled pressure is used; for lines, continuous pressure is applied.
Maintenance and Storage
- METRON recommends using the included cleaning wire to remove blockages in the needle by inserting and pulling the cleaning wire through the needle.
- After use, it is recommended to replace the cap and store the pen upright with the needle facing upwards to maintain the moisture level of the contents.
Specifications
- Product Name: Empty Metron Marker (part no. EP for Standard tip; EPM for Microtip).
- Capacity: The Standard Metron Marker holds approximately 6 ml (specified by METRON).
- Standard needle: 1" (one inch) long with an opening of 0.031" (0.031 inch).
- Microtip needle: 1" (one inch) long with an opening of 0.013" (0.013 inch).
The content has been generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.