Fluke 28 II Ex digital multimeter for Ex-areas
The Fluke 28 II Ex is a digital multimeter for measurements in areas where intrinsic safety is required. It is a measuring instrument that can be used where ordinary test equipment is not suitable because the equipment must be certified for use in Ex environments.
This multimeter is used for general troubleshooting and inspection of electrical systems, even when measurements need to be performed in demanding environments. It measures both AC and DC voltage and current, and it does so with true-RMS, providing reliable measurements on signals that are not perfectly clean and uniform. This is especially relevant for, e.g., motor controls and other electronics where the signal can be more uneven than a simple sine wave.
The instrument also has features that make it more practical to use: a low-pass filter for measurements on variable frequency drives, frequency measurement up to 200 kHz, high-resolution display, and the ability to record min./max./average as well as transient fluctuations. This means that you not only see a single instantaneous measurement but can also monitor changes that might otherwise be difficult to capture.
The casing is designed for harsh treatment and is IP67 rated, making it resistant to both dust and temporary immersion in water. At the same time, it is specified to withstand drops with the holster, which is a clear advantage when the instrument is used in the field or in facilities with a lot of movement and changing workplaces.
For a professional user, the relevant aspect here is the combination of Ex-approval, general multimeter functionality, and a construction suitable for industrial work. This makes it suitable for safe measurements in explosive atmospheres without compromising normal measurement tasks.
You can read more here:
See datasheet from the manufacturer
Watch product video from the manufacturer
Specifications
- Digital multimeter with intrinsic safety
- ATEX II 2G Ex ia IIC T4 Gb
- IECEx Ex ia IIC T4 Gb
- NEC/CEC Class I Division/Zone certifications
- Measures AC and DC up to 1000 V
- Measures AC and DC current up to 10 A
- True RMS measurement
- Low-pass filter
- Frequency measurement up to 200 kHz
- 4-1/2 digit high-resolution mode with 20,000 counts
- IP67 enclosure
- Withstands drops up to 3 meters with holster
- Safety category CAT III 1000 V / CAT IV 600 V
- Three AAA batteries
- Typical battery life: 400 hours
- Backlit display
- Weight with holster: 698 g
- Dimensions with holster: 6.4 cm x 10.0 cm x 19.8 cm
The content is generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.