Earth Bonding Point (EBP) plug – DESCO 231135
This Earth Bonding Point (EBP) plug 231135 from DESCO is designed to establish a common grounding point using protective earth in an ESD protected area. The product connects solely to the earth conductor via a European CEE (7) VII Schuko plug and comes with three 10 mm studs for connecting earth leads.
Construction and function
The 231135 is made of yellow, impact-resistant ABS plastic and is permanently sealed. Instead of live pins, there are moulded insulating plastic pins for positive placement in the socket. Each stud contains a built-in resistor with a nominal value of approximately 1 megohm (specified connector-to-earth-pin resistance 0.8–1.2 megohm). The product is manufactured in the United Kingdom.
Documentation
Technical details and measurements are documented by the manufacturer. See manufacturer's datasheet
Typical applications
- Used to provide a common grounding point for grounding and electrical bonding of ESD control points in an ESD protected area (EPA).
- Connection of wrist straps, bench and floor mats and other ESD control elements via ground leads to the plug's studs.
Specifications
- Manufacturer: DESCO
- Item number: 231135
- Type: Earth Bonding Point (EBP) plug
- Number of studs: 3 × 10 mm
- Material: Yellow, impact-resistant ABS
- Plug box size: 63 mm × 49 mm × 49 mm
- Weight: 36 g
- Connector-to-earth-pin resistance: 0.8–1.2 megohm (nominal 1 megohm per stud)
- Connector-to-connector resistance: approx. 2 megohm
- Fits: European CEE (7) VII Schuko socket
- Country of manufacture: United Kingdom
Content generated using AI – we reserve the right for errors.
Contact HIN for further product information.