Polishing disc for POF connectors
This polishing disc CT-PS/POF (Order No. 33.3023) from STAUBLI is designed for pre-treatment and polishing of end faces on Plastic Optical Fibre (POF) connectors. The polishing disc is used with 1000 grit polishing paper to grind/polish the fibre end faces.
Functional properties
- Intended use: grinding/polishing of POF fibre end faces.
- Compatible cable type: POF with outer diameter 2.2 mm and fibre diameter 1 mm.
- Assembly requirement: the cable must protrude approximately 0.5 mm when fixed in the disc.
- Polishing medium: 1000 grit polishing paper (not included).
- Important during use: the polishing paper must be wet (soaked with water) during polishing.
Typical applications
The Polishing disc CT-PS/POF is used to grind and polish fibre end faces on POF connectors with 1000 grit polishing paper. This is directly stated in the supplier's assembly instructions and describes the specific work process: fixing the POF cable in the polishing disc with approx. 0.5 mm protruding fibre and grinding with wet polishing paper.
Documentation
For detailed assembly instructions and further tool references, please refer to the manufacturer's complete instruction documentation:
See datasheet from manufacturer
Specifications
- Product name: Polishing disc CT-PS/POF (Order No. 33.3023)
- Manufacturer: STAUBLI
- For use with: Plastic Optical Fibre (POF) connectors
- Polishing paper: 1000 grit (not included)
- POF cable: outer diameter 2.2 mm; fibre diameter 1 mm
- Cable protrusion when fixed: approximately 0.5 mm
- Polishing paper must be wet during use
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.