Stäubli MC4-Evo 2 In-line Fuse 32.0329
The Stäubli MC4-Evo 2 In-line Fuse 32.0329 is an in-line fuse holder for solar power systems, where the fuse is located directly in the DC cable. It is used in the MC4-Evo 2 connector system and is designed to be part of a PV string where a safe and clear protection on the DC side is desired.
In practice, it is a pre-assembled cable component, which makes it easier to build a stable and consistent installation. This is a solution for DC 1500 V, and the test voltage is specified at 8 kV. This variant is rated for 15 A and has a cable length of 59 cm. The cable cross-section is 6 mm².
For the installer, it is relevant that it is specified as IP65/IP68 when assembled, and IP2X when disassembled. It can be used in temperatures from -40 °C to +50 °C. This makes it suitable for installations where demands are placed on both electrical protection and robustness in the daily plant environment.
See datasheet from the manufacturer
Typical applications
The solution is used in PV DC interconnection when a string or a cable section in a solar power system with MC4-Evo 2 components needs to be protected.
Specifications
- Manufacturer: STAUBLI
- MPN: 32.0329
- Product: MC4-Evo 2 In-line Fuse type PV-K/1500ILF3-15/6E-0059
- Connector system: MC4-Evo 2
- Voltage: DC 1500 V
- Test voltage: 8 kV
- Rated current: 15 A
- Cable length: 59 cm
- Cable cross-section: 6 mm²
- Protection degree, assembled: IP65/IP68 (1 m, 1 h)
- Protection degree, disassembled: IP2X
- Temperature range: -40 °C to +50 °C
The content has been generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.