Standoff flush cutter – PIERGIACOM TR 30 10
This standoff flush cutter from PIERGIACOM, designated TR 30 10, is a hand tool for precise and clean flush cutting close to the surface. The product is listed by the manufacturer as a tool specifically designed to provide a flush cut of component leads 1 mm from the surface.
Function and design
The TR 30 10 is specified with an overall length of 138 mm and a steel thickness of 3 mm. The manufacturer's stated maximum copper wire diameter is Ø 1.30 mm (16 AWG). The cutting force is stated as 5.5 kg. The grip model is specified as St, and the manufacturer notes that an ESD-safe version of the handle is available under order code TR 30 10 D.
Typical applications
The TR 30 10 is used to make a clean, flush cut of component leads, where the cut is made approximately 1 mm from the surface. This application is specified directly by the manufacturer and is the primary purpose stated for the tool.
Further information
The manufacturer's product text specifies both the standard grip (St) and the available ESD version (TR 30 10 D). For complete product information and model overview, please refer to the manufacturer's product page.
Source
See manufacturer's product page
Specifications
- Product name: TR 30 10.
- Manufacturer: PIERGIACOM.
- Category: standoff flush cutter (specified by the manufacturer).
- Tool length: 138 mm.
- Steel thickness: 3 mm.
- Designed for flush cutting component leads 1 mm from the surface.
- Maximum copper wire diameter: Ø 1.30 mm (16 AWG).
- Cutting force: 5.5 kg.
- Grip model: St; ESD-safe version available under order code TR 30 10 D.
Content generated with AI – errors may occur.
Contact HIN for further information about the product.