Product Overview
This diagonal cutter, Lindström 7154TC, is a precision carbide insert diagonal cutter with a tapered head shape designed for hard wire applications. The Lindström 7154TC is specified to provide precise flush "tip cuts" and is constructed with a carbide insert to handle hard materials.
Construction and Function
- Carbide insert (tungsten carbide) in the cutting area for increased wear resistance.
- ESD-safe synthetic handles with return spring for smooth operation.
- Precision screw/lap joint for correct tip and cutting edge alignment.
- Tapered flush head designed for precise tip-cuts.
- Polished/phosphate finish mentioned in manufacturer documentation for corrosion protection under certain variations.
Typical Applications
Information from the manufacturer indicates that the Lindström 7154TC is designed to make precise tip-cuts on the following components made of hard wire materials:
- Guidewires
- Catheters
- Fine trimming of stents
The product's characteristics and areas of application are stated in the manufacturer's material and data sheet.
Specifications
- Manufacturer: LINDSTRÖM
- Product number: 7154TC
- Type: Precision tungsten carbide diagonal cutter, tapered flush head
- Overall length (A): 112.5 mm (4.43 in)
- Head size: M (Medium)
- Cutting capacity, hard wire: 0.1–0.2 mm (0.004–0.01 in)
- Cutting capacity, soft wire: 0.1–0.9 mm (0.004–0.03 in) (indicated in manufacturer's table)
- Suitable for materials: Nitinol, stainless steel, platinum, titanium (indicated by the manufacturer)
- Handle characteristics: ESD-safe synthetic handles with return spring
- Joint type: Precision screw/lap joint for tip adjustment
- Warning: The manufacturer states that improper use can cause breakage of the carbide inserts; handle with care
Sources
See data sheet from the manufacturer
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.