SPS-ELECTR HA 6600H
The HA 6600H is a benchtop model for high-voltage testing, used to verify that electrical components and equipment can withstand the voltage they are subjected to in practice. It operates with both AC and DC testing and can also be used for insulation measurements, providing a clear picture of whether the insulation performance is adequate.
It is a typical solution in environments where electrical safety needs to be systematically documented and controlled. The test range extends from 100 V to 5,500 V for AC and from 100 V to 6,000 V for DC, and the insulation measurement range is from 100 kΩ to 50 GΩ. This provides the flexibility often needed in testing and quality assurance work.
Operation is centralized at the front of the unit, where high-voltage connections for SP 02 and SP 03 test probes are located. There is also a 7-inch TFT color display, allowing direct work at the bench without needing to connect additional equipment to get started. With USB and Ethernet/LAN, it can also be integrated into a more permanent test setup.
The power supply is broad, 90–250 V at 50/60 Hz, so it can be used in many common installations. See datasheet from the manufacturer
Watch product video from the manufacturer
Typical applications
- High-voltage testing of electrical products and components
- Insulation measurements in testing and quality assurance
- Work with SP 02 and SP 03 test probes
- Stationary test setup at a bench or in a laboratory environment
Specifications
- Manufacturer: SPS-ELECTR
- MPN: HA 6600H
- AC high-voltage test: 100 V to 5,500 V
- AC current range: 0–20 mA
- DC high-voltage test: 100 V to 6,000 V
- DC current range: 0–20 mA
- Insulation measurement: 100 kΩ to 50 GΩ
- Power supply: 90–250 V, 50/60 Hz
- Interfaces: USB, Ethernet/LAN
- Display: 7" TFT color display
- Front panel with high-voltage plug-in for SP 02 and SP 03 test probes
- GTIN/EAN: not specified
The content is generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.