Fluke i800 AC Current Clamp
The Fluke i800 is a current clamp for AC current measurement, used with a multimeter or other measuring equipment. It clamps around a conductor, allowing the current to be measured without breaking the circuit. This is particularly practical when you want to measure current quickly and safely on an installation, motor supply, or other AC load.
It functions as a current probe, converting the high primary current into a lower measurement signal that the instrument can read. The ratio here is 1000:1, so 1 mA at the output corresponds to 1 A in the conductor. This makes it suitable when ordinary multimeter inputs are insufficient for the high currents encountered in practice.
The i800 measures AC currents from 100 mA to 800 A rms and can be used on conductors with a diameter of up to 54 mm. It has a useful frequency range from 30 Hz to 10 kHz, covering both standard mains frequency and many other AC measurements. The output connects with 4 mm safety banana plugs, and the cable length is 1.6 meters, making it easy to work with in the field.
For a professional, it is particularly relevant that measurements can be taken without interfering with the conductor, and that the clamp is designed for use in environments with safety requirements for measuring equipment. It is therefore well-suited for service, troubleshooting, and ongoing monitoring where AC current needs to be measured directly on a conductor.
You can read more here:
See datasheet from the manufacturer
Specifications
- AC current clamp for use with multimeter or other measuring equipment
- Measurement range: 100 mA to 800 A rms
- Frequency range: 30 Hz to 10 kHz
- Ratio: 1000:1
- Output: 4 mm safety banana plugs
- Max. conductor diameter: 54 mm
- Output cable: 1.6 m
- Safety category: CAT III 600 V
- Max. non-destructive current: 1500 A rms (50/60 Hz)
- Item number: 2840283
- Manufacturer: FLUKE
The content is generated using AI - we reserve the right for errors.
Contact HIN for further information about the product.