Product Overview
The Alsident 50-4737-1-6 is an antistatic fume extraction arm from the Alsident System 50 family, configured for bench mounting with three joints. The product is specified as a System 50 AS (antistatic) fume extraction arm and is designated by the manufacturer as the 3-joint bench-mounted model with a nominal working reach of 945 mm.Technical Description
- Product: Alsident 50-4737-1-6 (System 50 AS, 3-joint)
- Bench mounting with integrated valve
- Tube diameter: Ø50 mm
- Tube material: chromated TCP aluminium for permanent conductivity
- Joint material: conductive, shatterproof and chemical-resistant polypropylene (PP)
- O-rings: maintenance-free and conductive
- Integrated grounding with 1 MΩ safety resistor
- Recommended airflow: 45–85 m³/h
- Temperature range for air: −15 °C to +90 °C
- AISI 316L acid-resistant material on threaded rods, springs, and thumbscrews
- Can be disassembled without tools for cleaning
Typical Applications
The Alsident 50-4737-1-6 is designed for spot extraction with bench mounting and for use in ESD areas. The product is approved for ESD areas according to IEC 61340-5-1:2016, and the built-in grounding with 1 MΩ safety resistor supports this application.Documentation
For detailed technical measurements and design dimensions, please refer to the manufacturer's datasheet.
See datasheet from the manufacturer
Specifications
- Manufacturer: ALSIDENT
- Manufacturer part number: 50-4737-1-6
- Product family: System 50 AS
- Configuration: bench-mounted, 3 joints
- Nominal working reach: 945 mm (product information)
- Working range (specified in datasheet): 445–1125 mm
- Tube diameter: Ø50 mm
- Recommended airflow: 45–85 m³/h
- Materials: chromated TCP aluminium (tube), conductive PP (joints)
- O-rings: maintenance-free and conductive
- ESD approval: IEC 61340-5-1:2016
- Grounding: integrated grounding wire with 1 MΩ resistor
- Temperature range for air: −15 °C to +90 °C
- Assembly/disassembly: possible without tools
Sources
Content generated using AI – we reserve the right to make errors.
Contact HIN for further information about the product.