Product Overview
The A10-L10 is a 90° angled ring terminal from CEMBRE's A-L series for copper conductors. The product is made of electrolytic copper, electrolytically tin-plated, and annealed. The A10-L10 features a spy hole and is specified for flexible conductor cross-sections 35–50 mm² as well as low-soldered (class 2) 50 mm². The screw diameter is M10 and the hole diameter (ØD) is 10.5 mm. A minimum packaging unit is 50 pieces.Material and Certification
- Material: electrolytic copper (min. 99.9% as stated in manufacturer's documentation)
- Surface: electrolytic tin plating (min. 3 µm stated in the datasheet)
- Connection type: crimp connection for copper conductors
- Approvals: UL-listed to UL486A - 486B (according to manufacturer's documentation) and RoHS-compliant
Installation and Mounting Notes
The following procedure is provided in the manufacturer's installation instructions and describes the typical sequence of actions when mounting the A10-L10:- Select the correct connector for the copper conductor used according to the table in the datasheet.
- Select appropriate crimping tool and die as specified by the manufacturer.
- Strip the cable to the length recommended by the datasheet table without damaging individual strands.
- Insert the conductor into the terminal's barrel.
- Apply the recommended number of crimps, starting from the tongue of the terminal.
Documentation
See datasheet from manufacturer
Specifications
- Product Name: A10-L10
- Series: Cembre A-L (90° angled ring terminal)
- Conductor Range: flexible conductors 35–50 mm²; low-soldered (class 2) 50 mm²
- Screw Diameter: M10
- Hole Length/ØD: 10.5 mm
- Material: electrolytic copper (min. 99.9%)
- Tin Plating: electrolytic, min. 3 µm
- Minimum Packaging Unit: 50 pcs.
- Approvals: UL-listed to UL486A - 486B; RoHS-compliant
Content generated using AI – subject to errors.
Contact HIN for further product information.