Ring Terminal — A14-L8 (A-L series)
The A14-L8 is a 90° bent tubular cable lug from CEMBRE's A-L series, designed for copper conductors and made as a crimp connection. The product is manufactured from electrolytic copper with a declared purity of ≥ 99.9% and is annealed. The barrel is tin-plated and equipped with an inspection hole (spy hole) to check for full insertion of the conductor.
Application and Installation Description
The A14-L8 is used as a mechanical and electrical termination for copper conductors with crimp-approved termination. Based on the manufacturer's instructions, the cable is mounted by:
- selecting the correct cable cross-section and suitable crimping tools and dies,
- tagging/insulating the conductor to the recommended strip length,
- inserting the conductor into the barrel and performing the specified number of crimps, starting from the flat side.
The manufacturer warns that all crimping operations must only be performed when the conductors are de-energized, and that there is a risk of pinching during crimping.
Documentation
Further technical information and installation details can be found in the manufacturer's datasheet:
See datasheet from manufacturer
Specifications
- Manufacturer: CEMBRE
- Article number: 2241245
- Type: A14-L8 (A-L series), 90° bent tubular cable lug
- Material: electrolytic copper, ≥ 99.9% purity, annealed
- Barrel: tin-plated (min. 3 μm)
- Conductor range: up to 70 mm² (flexible range 50–70 mm²)
- Screw thread / hole: M8, hole diameter ØD = 8.4 mm
- Inspection hole: yes (spy hole) for full conductor insertion
- Operating temperature range: −50 °C to 150 °C
- Approvals: UL-listed for USA and Canada (UL486A - 486B, File no. E125401)
The content is generated using AI – we reserve the right to make errors.
Contact HIN for further information about the product.